Controller for LED CHROMOFLEX Pro RC i350/700 3ch
Driver for RGB light sources radio controlled 3 channel (need to buy a remote control or USB adapter). LED lighting driver for RGB (multicolour) LED strips, LED modules and other LED light sources powered by 350mA or 700mA DC. The controller requires power from the power supply with the appropriate voltage and power corresponding to the maximum power consumed by the receiver (but not exceeding the maximum power of the controller) connected to it. The controller has the ability to create independent networks (set using ProCed programs) with any number of drivers in one network. Controllers in one network synchronize most programs and communicate within it wirelessly. With more controllers in one network, it is recommended that one of them (in the middle of the network) be set up as a MASTER by means of the ProCed program and adjusted accordingly to the remote control (appropriate network number and communication with the MASTER).
- Input voltage: 8VDC - 48VDC
- Maximum output current: 350mA/channel; 700mA/channel
- Number of output channels: 3 (R, G, B)
1. Last colour
2. Normal smooth colour change
3. The average smooth colour change
4. Slow colour change
5. "Blob" - randomly selected colours / darkened and brightening colours
6. "LSD" - randomly changing colors / non-synchronized
7. "Fire" - fire simulation / dimmed red colour with an orange flash
8. "Lightning" - dark blue with white flashes / non-synchronized
9. "Flashes": Randomly selected colours, non-synchronized flashes
10. User # effect (regulated by Software ProCed)
11. User # effect (regulated by Software ProCed)
12. User # effect (regulated by Software ProCed)
A configuration of buttons in the remote control:
The slider is used to obtain a constant colour, after a short press of the DIM button (the diode on the remote control flashes) the slider is used to dimming or brightening the colour or program.
The ON button, when pressed briefly, stops the program on a given colour, while the long one switches off the controller.
A short press on the DIM button also activates the function buttons (use the function keys to press the DIM key).
A configuration of function keys:
Select the WHITE -> program + button
Choose the BLUE button -> program -
Choose the GREEN button -> colour +
Choose the RED button -> colour -
Dimensions (LxWxH): 180x52x22
PILOT SLIM FOR CHROMOFLEX PRO RC 3-4CH REM ver.2
TASTER CONTROL DEVICE FOR CHROMOFLEX PRO RC 3 / 4CH
TOUCH PANEL WHITE or BLACK FOR CHROMOFLEX PRO RC 3 / 4CH
USB ADAPTER FOR CHROMOFLEX PRO RC DRIVER