CONSTANT CURRENT POWER SUPPLY for LED OTi DALI 90/220-240/1A0LT2L 250-1000mA 54-240V
OTi DALI 90 / 220-240 / 1A0 LT2 L
The value of the output current is regulated by mounting a resistor with the appropriate resistance (according to the datasheet).
Electrical data
Rated input voltage: 220 ... 240 V
Network frequency: 50 ... 60 Hz
Input voltage, alternating current: 198 ... 264 V
Input voltage, direct current: 176 ... 276 V
Current set: Programmable
Total harmonic distortion: <10%
Power factor: λ> 0.95
Efficiency EUZ: ≤94%
Power losses: 9,0 W
Power losses in standby: <0.25 W
Protective conductor: <0.5 mA
Initial inrush current: 25 A
Max. SE with fuse 10 A: 13
Maximum number of SEs for circuit breaker 16 A: 24
Maximum number of SEs with a safety of 25 A (B) : 29
Resistance to nap. Impact: (L / N-earth) 2 kV
Impact resistance: (L-N) 1 kV
Rated output voltage: 54 ... 240 V
U-OUT (operating voltage): <250 V
Rated output current: 250 ... 1000 mA
Output current tolerance: ± 3%
A frequency of the output current (100 Hz): <1%
Rated power: 13.5 ... 90 W
Galvanic isolation: Non-isolated
Dimensions and weight
Length: 280 mm
Width: 30.0 mm
Height: 21.0 mm
A distance of assembly holes, length: 270 mm
Product weight: 205.00 g
Wire cross-section, input side: 0.5 ... 1.5 mm²
Wire cross-section, outlet side: 0.5 ... 1.5 mm²
Cable length, input side: 8,5 ... 9.5 mm
Cable length, output side: 8,5 ... 9.5 mm
Temperatures and working conditions
Ambient temperature range: -25 ... + 50 ° C
Max. Temp. At the measuring point: tc75 ° C
Max. Housing temperature: 110 ° C
Relative humidity: 5 ... 85%
Durability
Durability SE: 50000 h
Additional product data
Housing (with admixtures) No.
Programming interfaceDALI capabilities
Dimming: Yes
DALI dimmable interface
Dimmable interface: Touch DIM
Dimmable interface: Touch DIM Sensor
Adjustment range: 1 ... 100%
Adjustment method: Full analogue dimming
A constant level of luminous flux: Programability / Programmable
Overheat protection.: Automatically reversible
Overload protection.: Automatically reversible
Short circuit protection.: Automatically reversible
Without protection przeciwprzeciążeniowego: Tak
Max. Length of wires for the lamp/module LED: 2.0 m
Suitable for luminaires with protection class: I
Suitable for emergency lighting.: Yes
Connection type, on the output side
Number of channels: 1
Certificates and Standards
Marks of the research station
Marks of the research station EL
The characters of the research station ENEC 10
The signs of the VDE-EMC research station
Characters of the CCC research station
Characters of RCM research stations
NormyWg. EN 61347-1 / Wg. EN 61347-2-13 / Wg. EN 55015 / Wg. EN 61547 / Wg. EN 61000-3-2 / Wg. EN 62384 / Acc. to EN 62386
Protection type: IP20