Power supply for LED 12V or 24V DC 100W slim FTPC100V12/24
Product description:
The POS power supply is ideally suited for supplying LED strips or LED modules. Thanks to its small size, it allows mounting in furniture, alcoves and everywhere where it is required that the power supply is as low as possible.
MODEL FTPC100V12 FTPC100V24
Output:
Rated voltage 12V / 24V
Rated current 8.33A / 4.17A
Power range 0 ÷ 99.96W / 0 ÷ 100.8W
Rated power 99.96W / 100.8W
UWY stabilization depending on UWE changes ± 1%
UWY stabilization depending on changes IWY ± 3%
Tolerance [3] ± 5%
Ripples and noise (max.) [2] 300mVP-P 400mVP-P
Setting time [4] 500ms INPUT
Input:
Voltage range 90 ÷ 264VAC
The range of voltage frequency 47 ÷ 63Hz
Power factor (type) PF> 0.9 / 230VAC, PF> 0.98 / 115VAC under full load
Efficiency (type) 90%
AC current (type) 1.1A / 115VAC, 0.6A / 230VAC
Starting current (typ.) 75A / 230VAC (25 ° C)
Power in no-load condition (typ.) <0.5W
SECURITY:
Overcurrent Range: 120 ÷ 200% Type: alternating on / off output voltage. Automatic return to normal operation after the cause disappears.
Short-circuit Type: alternating on/off output voltage. Automatic return to normal operation after the cause disappears.
Thermal Range: 110 ° C ± 5 ° C Type: Output voltage cut-off. Return to normal operation after the cause has been removed and again disconnected and then the input voltage is switched on
WORKING ENVIRONMENT:
Working temperature -20 ° C ÷ 45 ° C, tc = 80 ° C
Operating humidity 45 ÷ 85% relative humidity (non-condensing)
Storage temperature and humidity -30 ° C ÷ 70 ° C, 10 ÷ 98% relative humidity (non-condensing)
Temperature coefficient ± 0.05% / ° C (-20 ° C ÷ 45 ° C)
Resistance to vibrations 10 ÷ 500Hz, 2G, 10min / periodically for 30min. along the X, Y, Z axes
Degree of protection IP IP20
SAFETY STANDS AND ELECTROMAGNETIC COMPATIBILITY:
Safety standards Compliance with EN61347-1, EN61347-2-13
WE / WY insulation strength: 3.75kVAC / 1min
Insulation Resistance I / O: 2MΩ / 500VDC / 25 ° C / 70%
EMC emission standards Compliance with EN55015
EMC resistance standards Compliance EN61547; EN61000-4-2, -3, -4, -5, -6, -8, -11
Harmonics current. Compliance with EN61000-3-3; EN61000-3-2 (for a load ≥ 20% of the rated power)
OTHERS:
Dimensions: 180 x 65.5 x 31.2mm (length x width x height)
Weight 0.4kg;