4a.jpg

4a.jpg

4b.jpg

4c.jpg

Controller for LED 2 colours CHROMOFLEX Pro RC CV 2ch

Product description:

Driver for dynamic-white (W / WW) sources, radio controlled 2 channel (need to buy a remote control or USB adapter). LED lighting driver for two light colours for LED strips, LED modules and other 12-24VDC LED light sources. The controller requires a power supply with the appropriate voltage and power corresponding to the maximum power consumed by the tape (but not exceeding the maximum power of the controller) connected to it. The controller has the ability to create independent networks (set using ProCed programs) with any number of drivers in one network. Controllers in one network synchronize and communicate within it wirelessly. With more controllers in one network, it is recommended that one of them (in the middle of the network) be set up as a MASTER by means of the ProCed program and adjusted accordingly to the remote control (appropriate network number and communication with the MASTER).

Technical data:
- Input voltage: 12VDC - 24VDC
- Maximum output current: 5A / channel
- Number of output channels: 2 (W, WW)
- Maximum output power: (12VDC) 120W or (24VDC) 240W

A configuration of buttons in the remote control:
The slider is used to obtain a constant colour, after a short press of the DIM button (the diode on the remote control flashes) the slider is used to dimming or brightening the colour or program.
The ON button, when pressed briefly, stops the program on a given colour, while the long one switches off the controller.

Dimensions (LxWxH): 180x52x22

Controller accessories:

PILOT SLIM FOR CHROMOFLEX PRO RC 2CH REM
TASTER CONTROL DEVICE FOR CHROMOFLEX PRO RC 2CH
USB ADAPTER FOR CHROMOFLEX PRO RC DRIVER

Zapytaj o ofertę: Controller for LED 2 colours CHROMOFLEX Pro RC CV 2ch